Universidad Autónoma de Chile-ko ikertzaileekin lankidetzan egindako argitalpenak (53)

2024

  1. Comparative Analysis of Gas Emissions from Ecokiln and Artisanal Brick Kiln during the Artisanal Firing of Bricks

    Sustainability (Switzerland), Vol. 16, Núm. 3

  2. Determining biomethane potential from animal-source industry wastes by anaerobic digestion: A case study from La rioja, Spain

    Renewable Energy, Vol. 235

  3. Stabilization of extruded earth-based materials by adding hydrated cement powder from recycled concrete

    Journal of Building Engineering, Vol. 98

  4. State and perspectives of sustainable production of traditional silicate ceramics

    Open Ceramics, Vol. 17

2023

  1. Assessing technological properties and environmental impact of fired bricks made by partially adding bottom ash from an industrial approach

    Construction and Building Materials, Vol. 396

  2. Building decarbonization by means of ancient techniques. Assessment of environmental impact, energy performance and mechanical safety

    Journal of Building Engineering, Vol. 74

  3. Choosing the Most Suitable Antiseismic Device Technology for High-Rise Buildings, by Considering the Mechanical Response and Environmental Impact

    International Journal of Civil Engineering, Vol. 21, Núm. 5, pp. 825-838

  4. Influence of coal ashes on fired clay brick quality: Random forest regression and artificial neural networks modeling

    Journal of Cleaner Production, Vol. 407

  5. Physical and mechanical behavior of concrete specimens using recycled aggregate coated using recycled cement paste

    Construction and Building Materials, Vol. 393

  6. Study of properties and behavior of concrete containing EAF slag as coarse aggregate

    Developments in the Built Environment, Vol. 14

2022

  1. Effects of expanded vermiculite on the properties of fired bricks from water treatment sludge

    International Journal of Applied Ceramic Technology, Vol. 19, Núm. 3, pp. 1214-1226

  2. Low cost and eco-friendly building materials derived from wastes: Combined effects of bottom ash and water treatment sludge

    Construction and Building Materials, Vol. 324

  3. Manufacturing of fired bricks derived from wastes: utilization of water treatment sludge and concrete demolition waste

    Archives of Civil and Mechanical Engineering, Vol. 22, Núm. 2

  4. The role of specific heat capacity on building energy performance and thermal discomfort

    Case Studies in Construction Materials, Vol. 17

2021

  1. Assessment of technological performance of extruded earth block by adding bottom biomass ashes

    Journal of Building Engineering, Vol. 39

  2. Evaluation of mortars with combined use of fine recycled aggregates and waste crumb rubber

    Journal of Building Engineering, Vol. 43

  3. Recycling industrial slags in production of fired clay bricks for sustainable manufacturing

    Ceramics International, Vol. 47, Núm. 21, pp. 30425-30438

  4. The combined effect of bottom ashes and cellulose fibers on fired clay bricks

    Construction and Building Materials, Vol. 301

  5. The effect of infill walls made by eco materials on mechanical response, energy performance and CO2 print of residential and non-residential low-rise buildings

    Energy and Buildings, Vol. 243

2020

  1. Adobe bricks reinforced with paper & pulp wastes improving thermal and mechanical properties

    Construction and Building Materials, Vol. 254