Universidad Católica del Norte-ko ikertzaileekin lankidetzan egindako argitalpenak (10)

2024

  1. Analytical and experimental studies on toppling behavior of blocks misaligned with the slope face

    Bulletin of Engineering Geology and the Environment, Vol. 83, Núm. 4

  2. Towards Sustainable Urban Futures: Integrating a Novel Grey Multi-Criteria Decision Making Model for Optimal Pedestrian Walkway Site Selection

    Sustainability (Switzerland) , Vol. 16, Núm. 11

2022

  1. Assessing Provisions and Requirements for the Sustainable Production of Plastics: Towards Achieving SDG 12 from the Consumers’ Perspective

    Sustainability (Switzerland), Vol. 14, Núm. 24

2021

  1. Fenómenos de inestabilidad natural en macizos rocosos graníticos: laderas en jabre, campos de bolos y bolos irregulares de granito

    Boletín geológico y minero, Vol. 132, Núm. 4, pp. 375-398

  2. Laboratory physical modelling of block toppling instability by means of tilt tests

    Engineering Geology, Vol. 282

  3. Scale effect and correlation between uniaxial compressive strength and point load index for limestone and travertine

    Applied Sciences (Switzerland), Vol. 11, Núm. 8

2020

  1. Applying statistical analysis and machine learning for modeling the UCS from P-wave velocity, density and porosity on dry travertine

    Applied Sciences (Switzerland), Vol. 10, Núm. 13

  2. Correcting indirect strain measurements in laboratory uniaxial compressive testing at various scales

    Bulletin of Engineering Geology and the Environment, Vol. 79, Núm. 9, pp. 4975-4997

  3. Motorized tilt table based on arduino-controlled stepper motor

    54th U.S. Rock Mechanics/Geomechanics Symposium

  4. Stability analysis of over-tilted benches in an ornamental granite quarry

    Rock Mechanics for Natural Resources and Infrastructure Development- Proceedings of the 14th International Congress on Rock Mechanics and Rock Engineering, ISRM 2019