Publicaciones en colaboración con investigadores/as de Centro de Estudios y Experimentación de Obras Publicas (21)

2024

  1. An experimental study of tensile stress and deformation in an anisotropic rock

    IOP Conference Series: Earth and Environmental Science

  2. Assessment of Direct Tensile Strength Tests in Rock Through a Multi-laboratory Benchmark Experiment

    Rock Mechanics and Rock Engineering, Vol. 57, Núm. 5, pp. 3617-3634

2023

  1. A New Insight into the Stability of Precariously Balanced Rocks

    Rock Mechanics and Rock Engineering, Vol. 56, Núm. 5, pp. 3539-3550

  2. A brief review of the effect of wildfires on rockfall occurrence

    IOP Conference Series: Earth and Environmental Science

  3. Intact rock deformation bimodularity: an experimental study

    IOP Conference Series: Earth and Environmental Science

  4. Size effects on the tensile strength and fracture toughness of granitic rock in different tests

    Journal of Rock Mechanics and Geotechnical Engineering, Vol. 15, Núm. 9, pp. 2179-2192

  5. Toppling of a rock block resting on a rough surface

    IOP Conference Series: Earth and Environmental Science

2022

  1. Considerations Relevant to the Stability of Granite Boulders

    Rock Mechanics and Rock Engineering, Vol. 55, Núm. 5, pp. 2729-2745

  2. Influence of water content on the basic friction angle of porous limestones—experimental study using an automated tilting table

    Bulletin of Engineering Geology and the Environment, Vol. 81, Núm. 6

  3. Mineral Leaching Modeling Through Machine Learning Algorithms − A Review

    Frontiers in Earth Science, Vol. 10

2021

  1. Adaptación de las visitas a obra de Ing. Geotécnica (MICCP) y Prácticas de laboratorio (MIG) del Área de Ing. del Terreno a una modalidad de enseñanza online

    Memorias del Programa de Redes-I3CE de calidad, innovación e investigación en docencia universitaria: Convocatoria 2020-21 (Instituto de Ciencias de la Educación), pp. 1855-1861

  2. Effects of wildfire on rockfall occurrence: a review through actual cases in spain

    Applied Sciences (Switzerland), Vol. 11, Núm. 6, pp. 1-26

  3. Laboratory physical modelling of block toppling instability by means of tilt tests

    Engineering Geology, Vol. 282

  4. Scale effect and correlation between uniaxial compressive strength and point load index for limestone and travertine

    Applied Sciences (Switzerland), Vol. 11, Núm. 8

2020

  1. Applying statistical analysis and machine learning for modeling the UCS from P-wave velocity, density and porosity on dry travertine

    Applied Sciences (Switzerland), Vol. 10, Núm. 13

  2. Motorized tilt table based on arduino-controlled stepper motor

    54th U.S. Rock Mechanics/Geomechanics Symposium

  3. Relevant considerations on the stability of granite boulders

    54th U.S. Rock Mechanics/Geomechanics Symposium

  4. Stability analysis of balanced boulders: Methodology and case study

    ISRM International Symposium - EUROCK 2020

  5. The use of open-source hardware and software in low-cost geotechnical sensors: A strain-gauge logger and a tilt-test machine

    Rock Mechanics for Natural Resources and Infrastructure Development- Proceedings of the 14th International Congress on Rock Mechanics and Rock Engineering, ISRM 2019

  6. Una aproximación arqueológico-industrial hacia el establecimiento de los cargaderos de mineral de Rande (Redondela) como elementos de interés social y minero en la ría de Vigo

    Glaucopis: Boletín del Instituto de Estudios Vigueses, Núm. 25, pp. 243-260