Leandro Alejano Monge-rekin lankidetzan egindako argitalpenak (23)

2024

  1. Analytical and experimental studies on toppling behavior of blocks misaligned with the slope face

    Bulletin of Engineering Geology and the Environment, Vol. 83, Núm. 4

  2. Assessment of Direct Tensile Strength Tests in Rock Through a Multi-laboratory Benchmark Experiment

    Rock Mechanics and Rock Engineering, Vol. 57, Núm. 5, pp. 3617-3634

  3. Automatic Characterization of Block-In-Matrix Rock Outcrops through Segmentation Algorithms and Its Application to an Archaeo-Mining Case Study

    Geosciences (Switzerland), Vol. 14, Núm. 2

  4. Comparison of voussoir-beam stability assessments in underground rooms based on analytical and numerical methods

    New Challenges in Rock Mechanics and Rock Engineering - Proceedings of the ISRM Rock Mechanics Symposium, EUROCK 2024

  5. Size effects on strength and deformability of artificially jointed hard rock

    International Journal of Rock Mechanics and Mining Sciences, Vol. 176

2023

  1. A New Insight into the Stability of Precariously Balanced Rocks

    Rock Mechanics and Rock Engineering, Vol. 56, Núm. 5, pp. 3539-3550

  2. A brief review of the effect of wildfires on rockfall occurrence

    IOP Conference Series: Earth and Environmental Science

  3. Colección de minerais: Don Manuel de Sas de la Encina

    Universidade de Vigo

  4. Size effects on the tensile strength and fracture toughness of granitic rock in different tests

    Journal of Rock Mechanics and Geotechnical Engineering, Vol. 15, Núm. 9, pp. 2179-2192

  5. Toppling of a rock block resting on a rough surface

    IOP Conference Series: Earth and Environmental Science

2022

  1. Considerations Relevant to the Stability of Granite Boulders

    Rock Mechanics and Rock Engineering, Vol. 55, Núm. 5, pp. 2729-2745

  2. Influence of water content on the basic friction angle of porous limestones—experimental study using an automated tilting table

    Bulletin of Engineering Geology and the Environment, Vol. 81, Núm. 6

2021

  1. Determination of the basic friction angle fb of joints using the field tilt test: Results of various "fast" tests on outcrops

    IOP Conference Series: Earth and Environmental Science

  2. Effects of wildfire on rockfall occurrence: a review through actual cases in spain

    Applied Sciences (Switzerland), Vol. 11, Núm. 6, pp. 1-26

  3. Fenómenos de inestabilidad natural en macizos rocosos graníticos: laderas en jabre, campos de bolos y bolos irregulares de granito

    Boletín geológico y minero, Vol. 132, Núm. 4, pp. 375-398

  4. Laboratory physical modelling of block toppling instability by means of tilt tests

    Engineering Geology, Vol. 282

2020

  1. Influence of Microroughness on the Frictional Behavior and Wear Response of Planar Saw-Cut Rock Surfaces

    International Journal of Geomechanics, Vol. 20, Núm. 8

  2. Relevant considerations on the stability of granite boulders

    54th U.S. Rock Mechanics/Geomechanics Symposium

  3. Stability analysis of balanced boulders: Methodology and case study

    ISRM International Symposium - EUROCK 2020

  4. Stability analysis of over-tilted benches in an ornamental granite quarry

    Rock Mechanics for Natural Resources and Infrastructure Development- Proceedings of the 14th International Congress on Rock Mechanics and Rock Engineering, ISRM 2019