Publikationen in Zusammenarbeit mit Forschern von Universidad de La Rioja (21)

2022

  1. Low cost and eco-friendly building materials derived from wastes: Combined effects of bottom ash and water treatment sludge

    Construction and Building Materials, Vol. 324

2019

  1. Thermal and mechanical properties of fired clay bricks made by using grapevine shoots as pore forming agent. Influence of particle size and percentage of replacement

    Construction and Building Materials, Vol. 224, pp. 639-658

2017

  1. Grapevine shoots for improving thermal properties of structural fired clay bricks: New method of agricultural-waste valorization

    Journal of Materials in Civil Engineering, Vol. 29, Núm. 8

2016

  1. Energy Efficiency in Buildings: Study of Single-Leaf Walls Made with Clay Bricks

    Journal of Energy Engineering - ASCE, Vol. 142, Núm. 1

2015

  1. Development of sustainable fired clay bricks by adding kindling from vine shoot: Study of thermal and mechanical properties

    Applied Clay Science, Vol. 107, pp. 156-164

  2. Eco-fired clay bricks made by adding spent coffee grounds: a sustainable way to improve buildings insulation

    Materials and Structures/Materiaux et Constructions, Vol. 49, Núm. 1-2, pp. 1-10

2014

  1. Corrigendum to "Fired clay bricks manufactured by adding wastes as sustainable construction material - A review" [Constr. Build. Mater. 63 (2014) 97-107]

    Construction and Building Materials, Vol. 68, pp. 783

  2. Development of better insulation bricks by adding mushroom compost wastes

    Energy and Buildings, Vol. 80, pp. 17-22

  3. Fired clay bricks manufactured by adding wastes as sustainableconstruction material &- A review

    Construction and Building Materials, Vol. 63, pp. 97-107

  4. Possibilities for improving the equivalent thermal transmittance of single-leaf walls for buildings

    Energy and Buildings, Vol. 69, pp. 473-480

  5. Using of waste pomace from winery industry to improve thermal insulation of fired clay bricks. Eco-friendly way of building construction

    Construction and Building Materials, Vol. 71, pp. 181-187

2013

  1. Biomass logistics: Financial & environmental costs. Case study: 2MW electrical power plants

    Biomass and Bioenergy, Vol. 56, pp. 260-267

  2. Chemical characterization of pruned vine shoots from la Rioja (Spain) for obtaining solid bio-fuels

    Journal of Renewable and Sustainable Energy, Vol. 5, Núm. 3

  3. Improving the thermal transmittance of single-brick walls built of clay bricks lightened with paper pulp

    Energy and Buildings, Vol. 59, pp. 171-180

2012

  1. Biomass gasification for electricity generation: Review of current technology barriers

    Renewable and Sustainable Energy Reviews, Vol. 18, pp. 174-183

  2. Influence of horizontal joint on the thermal properties of single-leaf walls with lightweight clay blocks

    Energy and Buildings, Vol. 49, pp. 362-366

  3. Influence of tongue and groove system on the thermal properties of large-format voided clay bricks for single-leaf walls

    Construction and Building Materials, Vol. 30, pp. 169-173

2011

  1. PID Implantación del método de aprendizaje basado en Proyectos (BPL) en la asignatura de Ingeniería Térmica del cuarto curso del grado de Ingeniería Agrícola.

    PID Implantación del método de aprendizaje basado en Proyectos (BPL) en la asignatura de Ingeniería Térmica del cuarto curso del grado de Ingeniería Agrícola.

  2. PID Implantación parcial del aprendizaje basado en Proyectos (BPL) en la asignatura de Estructuras y soldadura conforme al Plan Docente vigente del departamento de Ingeniería Mecánica de la Universidad de La Rioja

    PID Implantación parcial del aprendizaje basado en Proyectos (BPL) en la asignatura de Estructuras y soldadura conforme al Plan Docente vigente del departamento de Ingeniería Mecánica de la Universidad de La Rioja

  3. PID Implantación parcial del aprendizaje basado en Proyectos (BPL) en la asignatura de Métodos y tiempos conforme al Plan Docente vigente del departamento de Ingeniería Mecánica de la Universidad de La Rioja

    PID Implantación parcial del aprendizaje basado en Proyectos (BPL) en la asignatura de Métodos y tiempos conforme al Plan Docente vigente del departamento de Ingeniería Mecánica de la Universidad de La Rioja