Publicaciones en colaboración con investigadores/as de Universidad de Navarra (14)

2023

  1. Wear mechanisms of TiN coated tools during high-speed tapping of GGG50 nodular cast iron

    Wear, Vol. 514-515

2022

  1. Transient temperature distribution in a rotating cylinder subject to a surface heat source and convective cooling

    Numerical Heat Transfer; Part A: Applications, Vol. 82, Núm. 11, pp. 743-764

2020

  1. Thread quality control in high-speed tapping cycles

    Journal of Manufacturing and Materials Processing, Vol. 4, Núm. 1

2015

  1. Experimental Study of Tapping Wear Mechanisms on Nodular Cast Iron

    Procedia Engineering

  2. Numerical Method to Calculate the Deformation of Thin Rings during Turning Operation and its Influence on the Roundness Tolerance

    Procedia Engineering

2014

  1. Real time diagnosis charts of thread quality in tapping operations

    Materials Science Forum

2013

  1. Monitoring of thread quality when tapping nodular cast iron with TiN-coated HSS cutting taps

    International Journal of Advanced Manufacturing Technology, Vol. 69, Núm. 5-8, pp. 1273-1282

  2. On line diagnosis strategy of thread quality in tapping

    Procedia Engineering

2010

  1. Identification of tool parallel axis offset through the analysis of the topography of surfaces machined by peripheral milling

    International Journal of Machine Tools and Manufacture, Vol. 50, Núm. 12, pp. 1097-1114

  2. Model for the prediction of heterogeneity bands in the topography of surfaces machined by peripheral milling considering tool runout

    International Journal of Machine Tools and Manufacture, Vol. 50, Núm. 1, pp. 51-64

2009

  1. Effect of tool setting error on the topography of surfaces machined by peripheral milling

    International Journal of Machine Tools and Manufacture, Vol. 49, Núm. 1, pp. 36-52

  2. Fault identification, diagnosis and compensation of flatness errors in hard turning of tool steels

    Safety, Reliability and Risk Analysis: Theory, Methods and Applications - Proceedings of the Joint ESREL and SRA-Europe Conference

  3. Model for surface topography prediction in peripheral milling considering tool vibration

    CIRP Annals - Manufacturing Technology, Vol. 58, Núm. 1, pp. 93-96

2008

  1. Model development for the prediction of surface topography generated by ball-end mills taking into account the tool parallel axis offset. Experimental validation

    CIRP Annals - Manufacturing Technology, Vol. 57, Núm. 1, pp. 101-104